PDA

View Full Version : Engine Question



Sprint6001
09-06-2008, 01:09 PM
Hey guys I was wondering if I was to run an 06 HondaRR on gas instead of alcohol about how much fuel pressure should I start out with? I know alcohol runs cooler its just I am toying with the idea of running gas the rest of this year and converting next year.

Thanks guys

Don
09-06-2008, 03:00 PM
The answer depends on many factors, but generally to be on the safe (rich) side, I would start out at 50 PSI, then back it down (or increase) as the plugs/temp/performance dictate. I imagine that you'll end up about 46-47 PSI.
Your best (and safest) bet is to add a power commander and have it dyno tuned.

Let us know when you are ready to make the switch to methanol, we have an awesome conversion for that engine.

Give us a call with any additional questions.

Thanks,
Don Guhl
Guhl Motors
717-618-4212
www.guhlmotors.com

NPS-ENGINES
09-10-2008, 10:07 AM
Don is right on the money....50psi is where I start them out when they leave our dyno. And yes put a powercommander on it.