Greenwood65
01-02-2009, 10:32 PM
Ok, now i'm seeming to have trouble with the rear axle set-up now. on the left rear side of the axle you have the radius rod from the hub and one from the brake caliper, but where there supposed to bolt up to the frame they both fit in the upper and lower holes on the frame. I don't remmember which one goes in the top one and which one goes in the bottom hole. Would greatly appreciate a response thanks-lucas
rodman
01-02-2009, 11:25 PM
Brake rod in bottom hole.
Greenwood65
01-02-2009, 11:41 PM
Thanks for the info appreciate it!!!!-lucas
Phil Meisner Jr.
01-04-2009, 11:39 AM
Lucas,
The brake rod goes in the bottom hole, BUT remember to run the bolt head towards the outside of the car. If you ever bend the brake rod at the track, and you have the bolt the other way you will have to remove the seat to get the bolt out.
Phil
Greenwood65
01-04-2009, 01:07 PM
Thanks!-hah I almost forgot about that ! thanks Phil!
Powered by vBulletin® Version 4.1.12 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.