i have water coming from the weep hole on the front on the cr250 motor. I just change the case o-ring and gasket. would the cases not be tight enough to cause that?

Robert

Did you remove or replace the water pump seals? They have to be installed in a certain direction or you will get fluid leaking out the weep hole.

it on the weep hole on the front of the cases by the inside cases o-ring, not the waterpump weep hole. Took everything apart again and inside gasket and rubber o-ring look right in the grooves, So I have no clues why it leaking. I have to order another side of gasket and I'll give it another shot.

thanks