this is a benchtop lathe for sale. perfect for micro sprint parts!!! it runs off of regular 110 power and has a 3/4 thru hole. lathe has a lead screw and thread dial but needs quick change gears to do threading. has easy adjustable spindle speeds via belt system. this lathe is good for turning, facing, boring, i.d. and o.d. grooving, chamfering, cutting angles, i.d. tapping, o.d. dies, and cutting off parts. machine comes with an assortment of HSS and carbide cutting tools, a steady rest, a live center, 1/2 keyed drill chuck, 0-1 dial indicater (0.001 reading) and hold down mounting holes. im guessing the machine weighs around 150-175 lbs. for any more info, PM or email at: AJHaney12@yahoo.com. asking 1500 OBO. i will only send pics to those that are highly interested. i will even throw in a bunch of stock to get you started (mostly 6061 and nylon for bushings)

typical parts you can make: shocks inserts, radius rods, radius rod spacers, spindle snouts, torsion bushings, wing spacers, flat and tapered axle spacers (cannot machine splines), chain tensioner wheels, kingpins, washers, clyindrical polishing of parts, custom length rods or screws, sleeves, ect. hell, i even cut down torsion stop thicknesses on this machine. don't delay, get it today!!!

ok people, i'd like this thing to go so I'll drop the lathe down to 950 OBO. it's an ATLAS lathe with outside machine dimensions of 45" long, 24" high, and approx 22" wide.

working dimensions: 5" 3 jaw chuck, 6" of cross slide travel, 2" of compound travel, approx 24" of saddle travel, and the dimension from the center of the chuck to the top of the ways are approx 4.75."

if interested email me at the posted adresss or contact my cell at: 570-617-2889.