Announcement

Collapse
No announcement yet.

Parting out everything to move. PARTS, PARTS and more PARTS Update

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • For Sale Parting out everything to move. PARTS, PARTS and more PARTS Update

    We are parting out our 2 rts rollers to help get things moving. I plan to sell everything down to the frames. Both cars were just built from the fixture up this past winter and only raced twice. Almost everything is brand new or barely used and undamaged. Frames have all updates with the exception of the longer rear rods,updates include rack and pinion mounting and extra pedal locations for smaller driver. I plan to sell frames complete with all panels, custom 2 piece hood design, custom made dash and brand new custom belly pans which are better than the originals including stainless heel stops.
    Contact me for more information. Feel free to contact me by either PM, text or calling me directly at 610-657-5226 for picsBill. Pics below are of the cars we will be parting out. The pictures are of the cars currently assembled.

    Parting out parts list,

    - 31 1/4" long tie rods with heims $15
    - 3/4" tortion bar stops $8 ea.
    - left front weight jacker assembly complete with torsion stop $75
    - internal wing adjuster assembly (cable style) complete handle to wing $75 re engineered so that it can't bend
    - Swedge Radius rod assorted lengths and dia no heims NEW $10 ea. Sizes below
    These are swedge rods and all have 3/8 threads for heims.
    8 1/4"
    9 1/4" 2x
    11 3/4" 2x
    12 3/4"
    13 1/4" 2x
    13 3/4"
    14" 2x
    14 1/2"
    17 1/4" 3x
    17 1/2"

    these are swedge rods and all have 5/16 threads
    10 3/4"
    11 3/4" 2x
    13 3/8"
    14 3/4" 7x
    15 1/2"

    - inline water thermostat complete. (thermostats were never used) $50 ,without thermostat $25 ea
    - Fuel shut off complete w/ends $5 ea
    - rear bumper $40 ea
    - Exhaust saddle assembly complete $20 ea
    - 5 older style 4 lug inner wheel hubs $5 ea (3) are powder coated orange (2) are black
    - leak down kit complete everything is there to test for leaks (new bulb)- $45
    - 88 69mm jug no power valve $100
    - assorted box of heim rod ends $2 each
    - RTS block style chain tensioner-$35 each complete like new
    - kirkey seat cut out for RTS 270 w/padding (14)- $50
    - 3 exhaust header (J elbows) $40 each (1) p11 (1) p12 and the other is from a 88-92 motor
    - used rear gears from 35-48 $15 per set
    - front gear (13 tooth) -$8 ea
    - 2 steel shifter cable brackets for motor plates $15
    - Honda intake boots (STRAIGHT AND ANGLED) $25 ea
    - assorted length pipe adapters for headers $10 ea
    - 2 stock Honda cranks $75 good but could use a need rebuild
    - 2 74mm good cranks need rebuild $100 each
    - brake pads (used)- $5 per set
    - stock 250 reed cage with reeds $20 each
    - reed cage spacers $2.50 ea
    - Custom made Squaring fixture for frame and toe alignment. $60.00
    - spare 88 honda motor complete with electronics. $800 (reed block and carb sold seperatly)
    - spare 88 honda bottom end no trans or stator everything else is there (needs a rebuild) $400
    v-vorce reed block with reeds. $65 ea
    - 01 DBY stock bore jug with only one race on it. Had piston ring break and scratched wall of jug. Has brand new power valve. will need repair and re nickle. stamped with a P this is a rare jug and one of the best when you can find it according to steve shelly. car drove from 11th to fourth before breaking with great compression. this jug cost me 1200 new. $500
    - 14 assorted drill sizes for jets $50 for complete set
    - 3 carb caps $4 ea
    - 3 keihin throttle spring with collar $5 ea
    - 2 keihin float $5
    - 3 keihin cable connector $2.50 ea
    - 7 keihin pilot jets $1 ea
    - 19 keihin main jets $1.50 ea
    - 3 keihim slide $ 10 ea
    - 9 keihim power jet $1.50 ea
    - single single roller tensioner $15
    - single roller tensioner arm $5
    - tensioner mounting bolts brand new $1 ea
    - steering lock bolt brand new $.50
    - honda 250 waterpump covers and seperators. $5 ea
    still more to come as I clean up.
    - assorted transmission parts in a box. Gears ,shafts, forks, seals and bearings, Make an offer. Ask and I'll send pics of everything
    Attached Files

  • #2
    whats the condition of that 88 cylinder

    Comment

    Working...
    X