Announcement

Collapse
No announcement yet.

Help Identifying 270 Chassis

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help Identifying 270 Chassis

    Looking for some help on identifying the make of my 270 chassis. I was told it might be an older stallard chassis. I am replacing the axle assemblies and cant figure out what front axle I need. There are a lot of Hyper components on the car so I figured a Hyper front axle would work. The new Hyper axle is a little different than my current setup. The radius rod and shock connections are further from the spindles on the new axle and the panhard bar connection is a little off as well. Do I just need to get different size radius rods to place the axle back in the correct location? Any help would be helpful. It was run with the Colorado 270 Outlaws by Austin Mclean in the past. Thanks

    Click image for larger version

Name:	IMG_0082.jpg
Views:	44
Size:	49.0 KB
ID:	314960
    Click image for larger version

Name:	IMG_0083.jpg
Views:	42
Size:	42.4 KB
ID:	314961
    Click image for larger version

Name:	IMG_0086.jpg
Views:	41
Size:	44.2 KB
ID:	314962
    Click image for larger version

Name:	IMG_0089.jpg
Views:	42
Size:	46.1 KB
ID:	314963

  • #2
    Click image for larger version

Name:	IMG_0114.jpg
Views:	38
Size:	47.2 KB
ID:	314965
    Click image for larger version

Name:	IMG_0189.jpg
Views:	38
Size:	51.2 KB
ID:	314966
    Click image for larger version

Name:	IMG_0225.jpg
Views:	36
Size:	57.6 KB
ID:	314967

    Comment

    Working...
    X